APR PORSCHE 2019-2021 MACAN S (95B.2) 3.0T EA839 ECU UPGRADES
We're excited to announce our Engine Control Unit (ECU) Upgrades are now available for the Porsche Macan S (95B.2) 3.0T engine with the Bosch MG1 ECU! Expect massive gains with up to 399-438 HP with 499-509 FT-LBS of torque on tap, depending on octane, from this simple software upgrade.
Features
- Delivers up to 399-438 HP with 499-509 FT-LBS depending on octane
- Max gains of +98-120 AWHP and +136-152 AWFT-LBS depending on octane
- Supports 95RON, 98 RON, 104 RON, and 108 RON fuel grades
- Standing RPM soft limiter increased
- Left-foot braking / brake boosting added
- Properly rescaled performance gauges within the ECU CAN data
- Optimized launch control strategy for faster response and boost building
- Optimized driveline protection during launch
- Optimized thermal management and additional protection
- Optimized high-gear LSPI protection and turbocharger protection added
- Speed limiter removed
- Exhaust crackle retains temperature safeties
- Auto start-stop defaults to the off position
- No hardware required (Software only)
- standard bolt on modifications
- Eliminated the need for a TCU upgrade to achieve full torque
- Free lifetime updates
- Direct OBDII port flash (No ECU removal)
- 30 day money back guarantee
| Stage | Fuel grade | Max HP | Max TQ | Max HP Gain Over Stock | Max TQ Gain Over Stock | |
|---|---|---|---|---|---|---|
| - APR recommends and tuned with Sunoco GT 260 for 104 RON mode and Sunoco GT 260 Plus for 108 RON mode. Never use lower octane than specified by the mode. | ||||||
| - Max increases are based on APR's actual measured stock values and not those reported by VAG. | RON = ROW Fuel Grades | ||||||
| - Reported wheel figures measured on APR's in house Dynamometer using SAEJ1349 correction and an average of multiple runs. Crank figures are estimated based on the measured wheel figures. Results may vary depending upon environmental conditions, vehicle, transmission, vehicle health, operating conditions, temperatures, fuel grade, dyno type, dyno setup, other variables and other modifications. On the dyno, this platform will see large swings in power based on intake air temperature, and the gear in which it's dynoed. | ||||||
| Stock As Reported by Porsche | 95 RON | 348 PS | 354 FT-LBS | |||
| Stock As Measured by APR | 98 RON | 361 HP | 368 FT-LBS | |||
| APR Stage 1 | 95 RON | 399 HP | 499 FT-LBS | +98 HP | +136 FT-LBS | |
| APR Stage 1 | 98 RON | 408 HP | 509 FT-LBS | +110 HP | +150 FT-LBS | |
| APR Stage 1 | 104 RON | 425 HP | 509 FT-LBS | +117 HP | +151 FT-LBS | |
| APR Stage 1 | 108 RON | 438 HP | 509 FT-LBS | +120 HP | +152 FT-LBS | |
APR Stage 1 is available for 95 RON, 98 RON, 104 RON, and 108 RON.
The APR difference
Who we are
We’re a global automotive engineering firm nestled in Opelika, Alabama. Our 80,000ft² state-of-the-art facility is home to some of the best engineers in the industry, who have mastered hundreds of engine management systems. We have multiple engine and chassis dynos, and the resources necessary to create our ECU Upgrades in-house, from the ground up! We're not a new company either. We've been around since the 90's and we have a strong financial backing to ensure we'll be here to support you for decades to come!
What we do
We optimize everything to make your engine more powerful. We adjust air-fuel ratios, advance ignition, increase boost pressure, alter cam positions and lift profiles, and more, all depending on the type of engine and management system, of course! We don’t take shortcuts, and we don’t take risks. We do it the right way.
How we differ
With our proprietary calibration and direct ram access data logging tools and operating system code changes, we’re able to make some of the strongest and fastest ECU upgrades, without needing costly end user adjustments. We work with the ECUs intelligent modeling and closed-loop systems, and beta test in multiple environments to create upgrades that work no matter where you drive!
The APR Difference
APR Direct Port Programming
APR’s DirectPort Programming is now available! Any APR Dealer in the world, connected to the Internet, has direct access to APR’s latest ECU upgrades for loading directly over the vehicle's OBD-II port. This completely eliminates the need to remove and open the ECU for currently available files and can be uninstalled at any time!
APR ECU Explorer
APR’s proprietary ECU Explorer gives APR’s Calibration Engineers unparalleled access to the vehicle’s entire engine management system. Typical commercially available data logging tools, used by most tuners, only allow logging up to 12 engine-operating variables at extremely low data rates. These tools are also limited to a small, specific list of variables. APR’s ECU Explorer is capable of logging every variable found within the ECU with far more variables logged at once, at very high data rates.
APR ECU Composer
APR’s proprietary ECU Composer is used for altering the engine management system. With full access to every table, map and variable within the ECU, APR’s Calibration Engineers are not limited to a handful of maps as is common for most tuning companies.
APR ECU Assembly
APR’s Electrical Engineers have the ability to alter the code structure of the ECU. Through code levels changes, APR's Engineers are able to add features to the ECU. Other changes allow higher torque limits than those achievable through only modifying calibration data or using piggyback devices as is the case for many tuners. This allows APR's engineers to often not require transmission software to meet or exceed advertised gains. On the highly modified end, this often allows APR to make turbo upgrades operate without the need for external manual controllers.
| Vehicle | Market | Engine | Transmission |
|---|---|---|---|
| Porsche Macan S (95B.2) 2019+ | All | 3.0T | All |
| Product | Price Exc. VAT | Price Inc. VAT | |
|---|---|---|---|
| IMPORTANT PRICING AND AVAILABILITY DETAILS: | |||
| - Availability and ECU Compatibility: Stages, programs, and features may not be available for all ECUs. | |||
| - ECU Revision Notice: Multiple ECU revisions exist for each platform. APR software may be temporarily unavailable when factory updates are applied. An APR dealer can check availability in person, or over the phone if the ECU boxcode/revision is known. | |||
| Stage 1 ECU Upgrade | £0.00 | Please Call | |
How to Purchase
Please use the APR Dealer Locater Tool to locate an APR Dealer, confirm availability and schedule an appointment.
Please note vehicle manufacturers issue many ECU part numbers and revisions throughout their vehicle lineup. As such, some ECUs may be temporarily unavailable as new parts and/or revisions are released. If the vehicle’s ECU part number and revision is known, availability can be checked at any APR Dealer.
30 Day Money Back Guarantee
All APR ECU Upgrades include a 30-day money back guarantee with no questions asked. If for any reason the owners is dissatisfied with the APR ECU Upgrade, they may return to the place of purchase for a full refund, provided they are within the 30 day period from the time of the initial purchase. Labor or shipping charges are not included in the guarantee and are at the discretion of the place of install.
Limited Lifetime Warranty
All APR ECU Upgrades include a limited lifetime warranty against defects in the software, and to provide free updates and reflashes as they become available. Labor or shipping charges are not included in the warranty and are at the discretion of the place of install.
