APR Audi C6 A6 and Q7 3.0 TFSI ECU Upgrade

engineAPR is pleased to present the ultimate engine control unit (ECU) upgrade for the 3.0 TFSI!

APR’s ECU Upgrades are the best value-per-horsepower modification one can make to the 3.0T engine. The upgrades dramatically increase horsepower and torque, making for an exceptionally quicker and more exciting vehicle. This is made possible through APR’s optimization of the factory engine management system to take full advantage of the engine’s capabilities, without needing any end user adjustment. The software loads to the factory ECU through APR's CCD Simos 8.3 models.

APR ECU Upgrade Stages

APR’s ECU Upgrades are available in multiple stages, supporting various octanes both with or without any hardware modifications. Specific software is available for use with APR's Supercharger Drive Pulley upgrade, while all stages are fully compatible with an upgraded intake, supercharger cooler, exhaust system, or other minor bolt on modifications.

APR Stage I ECU Upgrade

The APR Stage I ECU Upgrade is the first step towards making more power! This simple upgrade requires no engine hardware modifications, and produces 356-388 HP with 349-364 FT-LBS of torque. Gains as high as 81-114 HP and 65-91 FT-LBS of torque are available throughout the power band, making the vehicle exceptionally quicker in all scenarios. To get more power, the vehicle can be outfitted with an upgraded intake, supercharger cooler, exhaust system and other small modifications without requiring any new modification to the ECU. To run APR's Supercharger Drive Pulley upgrade, APR’s Stage II ECU Upgrade is required.

Dyno Testing
Select A Graph Select Graph Type
dyno
dyno
dyno
dyno
dyno
dyno
dyno
dyno
dyno
APR Calibration Report
Stage Fuel grade Max Power
HP
Max Torque
FTLBS
Max Power
Gain over Stock
Max Torque
Gain over Stock
- APR recommends and tuned with Sunoco GT 260 for 100 AKI mode and Sunoco GT 260 Plus for 104 AKI mode. Never use lower octane than specified by the mode.
- Max increases are based on APR's actual measured stock values and not those reported by VAG.
- Reported wheel figures measured on APR's in house Dynapack Dynamometer with a US Spec C6 A6, using SAEJ1349 correction and an average of multiple runs. Crank figures are estimated based on the measured wheel figures. Results may vary depending upon environmental conditions, vehicle, transmission, vehicle health, operating conditions, temperatures, fuel grade, dyno type, dyno setup, other variables and other modifications.
Stock C6 A6 As Reported by Audi 95 RON 290 HP 310 FT-LBS    
Stock As Measured by APR 98 RON 291 HP 317 FT-LBS    
APR Stage I 95 RON 356 HP 349 FT-LBS +81 HP +65 FT-LBS
APR Stage I 98 RON 369 HP 354 FT-LBS +95 HP +75 FT-LBS
APR Stage I 104 RON 388 HP 364 FT-LBS +114 HP +91 FT-LBS

Acceleration Data

Acceleration Data
  0-60 MPH 0-100 MPH 60-120 MPH 60-130 MPH
  Stock APR Stage I Stock APR Stage I Stock APR Stage I Stock APR Stage I
All figures measured by APR using a stock C6 A6 3.0 TFSI Tiptronic. Because the factory speed limiter is set to 125mph, the stock runs were conducted with the speed limiter removed. APR Stage I runs were performed with APR Stage I 93 Octane programming. All runs were conducted from the same starting point.
Tiptronic Drive Mode 5.5 4.8 12.9 10.7 13.5 10.5 22.4 17
Tiptronic Sport Mode 5.4 4.9 12.7 10.9 13.2 10.6 21.4 16.7
Tiptronic Manual Mode 5.5 4.7 12.8 10.6 13.2 10.4 18.3 13.3

APR ECU Upgrade Included Features

APR World Class Calibration Expertise

engine

Tuning 101:

The 3.0T engine uses a Continental Simos 8 ECU for engine management. Basically, it’s a computer that tells the engine how to operate. Tuning software, like the APR ECU Upgrade, tells the engine how to make more power. It does this by running more boost pressure, optimizing the cam shaft positions, adjusting the air/fuel ratio, advancing ignition timing, and more.

A Better Engine Management System:

The 3.0T’s ECU is incredible. Without the driver knowing otherwise, the ECU makes intelligent adjustments to the engine’s operations to keep it running smoothly. Unlike ECUs found in many other makes and models, when properly tuned, the ECU eliminates the need for custom tuning to maximize output, even when weather conditions change dramatically.

How APR Differs from the Competition:

The ECU is powerful, but extremely difficult to master. Without mastery, the ECU must be simplified, removing what makes it so desirable. The result is an incomplete product that often requires end user adjustment to maximize output in limited scenarios. On the contrary, APR’s Engineers spent years mastering the ECU to unlock its full potential. With complete access to the thousands of maps, tables and variables within, as well as a high-level understanding of how it works, APR’s Engineers were able to take advantage of everything the ECU has to offer. Power is maximized in nearly all scenarios, eliminating the need for end user adjustments. High performance operational modes are enabled and calibrated to deliver smooth daily driving, with a snappy and responsive throttle during moments of spirited driving. Lastly advanced high-output protection routines are enabled, allowing the ECU to make constant adjustments to airflow and fuel to cool and protect the engine, all without the driver knowing otherwise.

The APR Difference

APR ECU Explorer

ECUxAPR’s proprietary ECU Explorer gives APR’s Calibration Engineers unparalleled access to the vehicle’s entire engine management system. Typical commercially available data logging tools, used by most tuners, only allow logging up to 12 engine-operating variables at extremely low data rates. These tools are also limited to a small, specific list of variables. APR’s ECU Explorer is capable of logging every variable found within the ECU with far more variables logged at once, at very high data rates.

APR ECU Composer

ECUcAPR’s proprietary ECU Composer is used for altering the engine management system. With full access to every table, map and variable within the ECU, APR’s Calibration Engineers are not limited to a handful of maps as is common for most tuning companies.

APR ECU Assembly

ECUsAPR’s Electrical Engineers have the ability to alter the code structure of the ECU. Through code levels changes, APR's Engineers are able to add features to the ECU. Other changes allow higher torque limits than those achievable through only modifying calibration data or using piggyback devices as is the case for many tuners.

Application Guide
Make Model Generation Market ECU Type Engine Engine Code Transmission
Audi A4 Typ 8K / B8.5 All Simos 8.5 3.0 TFSI CMU Manual & S Tronic
Audi A5 Typ 8T / B8.5 All Simos 8.5 3.0 TFSI CHM & CMU Manual & S Tronic
Audi A6 Typ 4F / C6 All Simos 8.3 3.0 TFSI CAJ, CCA, CGW, CGX & CTU Tiptronic
Audi A6 Typ 4G / C7 All Simos 8.5 3.0 TFSI CAJ, CCA, CGW, CGX & CTU S Tronic & Tiptronic
Audi A7 Typ 4G / C7 All Simos 8.5 3.0 TFSI CGW, CGX, CHM, CTT & CTU S Tronic & Tiptronic
Audi A8 Typ 4H / D4 All Simos 8.5 3.0 TFSI CGW, CGX, CMD & CTU Tiptronic
Audi Q7 Typ 4L All Simos 8.3 3.0 TFSI CJT, CJW, CNA & CTW Tiptronic
Audi S4 Typ 8K / B8 All Simos 8.4 3.0 TFSI CCB, CGW, CGX & CTU Manual & S Tronic
Audi S4 Typ 8K / B8.5 All Simos 8.5 3.0 TFSI CCB, CGW, CGX & CTU Manual & S Tronic
Audi S5 Typ 8T / B8 All Simos 8.4 3.0 TFSI CAK, CCB, CGW, CGX & CTU Manual& S Tronic
Audi S5 Typ 8T / B8.5 All Simos 8.5 3.0 TFSI CAK, CCB, CGW, CGX & CTU Manual& S Tronic
Volkswagen Touareg Typ 7P / MK2 All Simos 8.5 3.0 TFSI CJT & CYJ Tiptronic
Pricing
Stage Minimum Requirements Price Exc. VAT Price Inc. VAT
IMPORTANT PRICING AND AVAILABILITY DETAILS:
- Availability and ECU Compatibility: Stages, programs, and features may not be available for all ECUs.
- ECU Revision Notice: Multiple ECU revisions exist for each platform. APR software may be temporarily unavailable when factory updates are applied. An APR dealer can check availability in person, or over the phone if the ECU boxcode/revision is known.
APR Stage I ECU Upgrade None £662.34 £794.81

How to Purchase

APR DealerPlease use the APR Dealer Locater Tool to locate an APR Dealer, confirm availability and schedule an appointment.

Please note vehicle manufacturers issue many ECU part numbers and revisions throughout their vehicle lineup. As such, some ECUs may be temporarily unavailable as new parts and/or revisions are released. If the vehicle’s ECU part number and revision is known, availability can be checked at any APR Dealer.

APR Tuned

Phone: 0333 240 6823 Address: APR Tuning UK, Unit 1 Siemens Road, Manchester M44 5AH, UK

Copyright © 1997 - Present Day: APR Tuning UK. All Right Reserved

While we try to keep everything current, APR tuning Ltd is not responsible for errors in pricing on this web site. All prices are in GBP and are applicable to the UK only.